Chapter 6: DVR Menu

MAIN MENU

In order to select cameras for recording, set recoding quality, schedule recording times and to set other operation parameters, you will need to access the DVR’s menu.

To access the DVR’s main menu, press the menu button on the DVR’s front panel. You will see the following screen on the monitor connected to the DVR.

MAIN MENU

 

> CAMERA SELECT

1 2 3 4

RECORD SELECT

1 2 3 4

RECORD MODE EACH

 

RECORD FRAMERATE

30

VIDEO QUALITY

NORMAL

RECORD SCHEDULE

 

SUB MENU

HARD DRIVE SETUP

SENSOR / MOTION SETUP

NETWORK SETUP

PRESS (UP, DOWN) , THEN (SELECT)

PRESS (MENU) TO EXIT

In the main menu, the arrow indicator > will be shown on the screen to the left of the menu listings menu

selections. Press the UP or DOWN key on the DVR front panel to move the arrow sign > up or down in order to navigate to the menu selection desired.

You can also use this function via network.

CAMERA SELECT

To select cameras for viewing on your monitor, navigate to CAMERA SELECT.

Then, use the buttons on the DVR’s front panel to select a camera for real-time viewing on the monitor screen.

MAIN MENU

 

> CAMERA SELECT

1 2 3 4

 

 

You can also press the select button for different combinations of camera viewing. For example,

When you choose ( - - - - ), all cameras will be disabled.

When you choose (1 2 3 4), all cameras will be operational.

When you choose ( - - - 4 ), only camera 4 will be operational.

When you choose (1 2 - 4), cameras 1, 2, and 4 will be operational. There are 16 different combinations of camera viewing settings.

Note: When viewing in quad screen mode, the following diagram shows where each camera is displayed on the monitor connected to the DVR.

18

Page 18
Image 18
Maxtor 4-Channel DVR (Digital Video Recorder) user manual Main Menu, Camera Select