Maxtor 4-Channel DVR (Digital Video Recorder) user manual Accept Client YES IP Address

Models: 4-Channel DVR (Digital Video Recorder)

1 69
Download 69 pages 55.47 Kb
Page 27
Image 27

Important! : : The MAC ADDRESS is issued by the manufacturer and should be on a label located on the network board in your DVR. Keep this number in a safe place for future reference.

If you have a battery failure, replace the on-board backup battery and re-input the MAC ADDRESS.

<How to input MAC ADDRESS>

1.After turning off the power, take off the network board.

2.Move and fix the jumper into the left 2 pins on the center of the main board.

3.After inserting the network board and turning on the power, input the MAC ADDRESS.

4.After turning off the power, take off the network board.

5.Move and fix the jumper into the right 2 pins on the center of the main board.

6.Insert the network board again and cover with the case of the DVR.

If you don’t follow this step, you can’t use Network.

The IP ADDRESS, SUBNET and GATEWAY above are only used for an example. Do not use them for your NETWORK SETUP.

The IP ADDRESS, SUBNET and GATEWAY are provided by your Internet Service Provider (ISP) when you setup your account. Keep your ISP account information in a safe place for future reference.

NETWORK SETUP (CONTINUED)

NETWORK SETUP is available for this DVR.

1.When you first open the NETWORK SETUP window, the arrow will be next to ACCEPT CLIENT.

While the arrow is next to ACCEPT CLIENT, use the select button to change the status (YES/NO).

2. Use the up

and down buttons

to move the arrow to the other categories in the

NETWORK SETUP menu.

 

3.To change the numbers in MAC ADDRESS, IP ADDRESS, SUBNET and GATEWAY, move the arrow next to the specific category that you want to change (i.e. IP ADDRESS).

4.When you press the select button the arrow will move to position B above the category you have chosen (Refer to the diagram below).

Note: When the arrow moves to position B, the category above will disappear to make room for the arrow. For example, if you select IP ADDRESS, the arrow moves above the farthest left digit of IP ADDRESS and MAC ADDRESS disappears.

 

 

NETWORK SETUP

 

> ACCEPT CLIENT

 

[YES]

 

 

 

 

\/

 

 

 

 

 

 

 

 

 

IP ADDRESS

 

 

192.168.001.090

 

 

 

SUBNET

 

 

255.255.255.000

 

 

 

GATEWAY

 

 

192.168.991.245

 

 

PRESS (UP, DOWN) , THEN (SELECT)

PRESS (MENU) TO EXIT

27

Page 27
Image 27
Maxtor 4-Channel DVR (Digital Video Recorder) user manual Accept Client YES IP Address