Maxtor 4-Channel DVR (Digital Video Recorder) user manual Motion Setup, Network Setup

	SENSOR/ MOTION SETUP
SENSOR/ MOTION RECORD TIME		10
ALARM OUT TIME		00
	SENSOR TYPE	MOTION
>CH-1	NOT INSTALLED	LEVEL4
CH-2	NOT INSTALLED	LEVEL4
CH-3	NOT INSTALLED	LEVEL4
CH-4	NOT INSTALLED	LEVEL4

PRESS (UP, DOWN) , THEN (SELECT)

PRESS (MENU) TO EXIT

In NORMAL-CLOSE mode, if an intruder cuts the cable line that connects the sensor to the DVR, sensor recording starts automatically. In NORMAL-OPEN mode, if an intruder cuts the cable line that connects the sensor to the DVR, the sensor recording will not start at all.

MOTION SETUP

There are 5 different modes for sensor activated recording:

1.OFF: No motion direction is connected to the DVR unit.

2.Level 1~4: Level 4 is the most sensitive.

NETWORK SETUP

NETWORK SETUP is available for this DVR.

If you plan to connect your DVR unit to a network, navigate to NETWORK SETUP.

MAIN MENU
CAMERA SELECT	1234
RECORD SELECT	1234
RECORD MODE	EACH
RECORD FRAMERATE	30
VIDEO QUALITY	NORMAL
RECORD SCHEDULE

SUB MENU

HARD DRIVE SETUP SENSOR / MOTION SETUP

> NETWORK SETUP

Then, press the select button to display the following menu:

NETWORK SETUP

> ACCEPT CLIENT	[YES]
MAC ADDRESS	00.22.24.23.25.26
IP ADDRESS	192.168.001.090
SUBNET MASK	255.255.255.000
GATEWAY	192.168.991.245

PRESS (UP, DOWN) , THEN (SELECT)

PRESS (MENU) TO EXIT

26