Maytag MGR6875ADB/Q/S/W, MGR6775ADB/Q/S/W Disassembly Procedures, Gasket and Door Disassembly

Disassembly Procedures

!WARNING

To avoid risk of electrical shock, personal injury, or death: disconnect electrical and gas supply before servicing.

Gasket and Door Disassembly

NOTE: Door gasket can be replaced by removing door insert clips and sliding gasket out of bottom door insert.

1.Remove oven door, see "Oven Door(s)-Door Removal" procedure.

2.Remove screws securing doorframe to liner located at the bottom.

3.Remove side screws securing doorframe to door liner.

4.Remove screws securing door trim at the top.

5.Slide doorframe and glass off liner from the bottom.

6.Remove screws securing door handle to door liner. (Two on the sides and two in front.)

7.Remove screws securing door baffle to liner.

8.Remove screws securing door baffle to window pack.

9.Remove door baffle and insulation wrap.

10.Remove screws securing window pack to liner. (Window pack comes out as an assembly.)

	Lower Oven Door
26	16023415	©2004 Maytag Services