Definitions
2-11
Assigning cards
-
Procedure 2-1
Order for assigning cards
1
Assign cards requiring a card slot 1 assignment (high priority slot).
2Assign cards for high-usage trunks, such as CO trunks.
3Assign cards for low-usage trunks, such as paging and dictation.
4Assign cards for attendant consoles.
Note:
For the.PE UEM (NT8D13AA/DC), card slot 1 is reserved for
high priority signaling. For the IPE UEM (NT8D37AA/DC), both card
slots 0 and 1 are reserved for high priority signaling.
5
Assign Digitone receiver cards.
6Assign cards for sets associated with multiple appearance groups.
7Assign remaining cards. On a system which has a high density of
Digitone
sets, assign the least number of
SO0
line cards to loops which
have Digitone receivers assigned.
Note:
Loops and Conference/Tone and Digit Switch Cards
(Conf/TDS) should be evenly distributed across Network UEMs and
groups.
8Calculate the total load per UEM.
9Calculate the total load per loop.
10 If required, rearrange card assignments to balance the load.
System engineering 553-3001-151