iii
About this document
General information
The Spares planning guide provides all the information necessary for the
calculation and planning of spares (replaceable) items and provides failure
rates for the SL-1 hardware.
The success of a maintenance program depends largely on the availability of
an adequate stock of replaceable items. To ease maintenance and system
reliability, follow the procedures given here for calculating spares stocks.
Spares requirements can be calculated to service SL-1 systems from a single
depot (repair house) or a centralized depot serving subdepots. Read on for
more information.
-
This document has been updated to include new naming conventions. Since
the SL-1 is available in both AC and DC versions, the Product Engineering
Code (PEC) is given, in some cases, for both AC and DC power options.
The failure rates of some items may not appear in this release.
Note:
Running the SL-1 system at lower temperature levels will
increase the life expectancy of the components and improve overall
system reliability.
References
See the SL-1 planning
&
engineering guide
for
.I
:
^_
^
-
Muster index
(553-3001-000)
_..
. . .
.;
::;
::
:.:
.,‘!
-
System overview
(553-3001-100)
-
Installation planning
(553-3001-120)
Spares planning 553-3001-l 53