66 Station equipment
Telephones -Description, installation, operation, and maintenance
(553-2201-l 10) for more information.
-
NTlFlOAA
printed circuit board assembly and housing for M3000
,-,.
.c;
_
.‘..F
digital touchphone. Refer to
Meridian h43000 Touchphone
-
1.
. __
“;.‘“.‘-,.:
,
Description, installation, operation, and ma@tenance
(553-2201-l 15)
for additional information.
The following features are available:
-
Automatic data rate detection at all rates using the ASCII “Carriage
Return” character
-
Keyboard dialing for originating data calls to local and remote hosts or
DTE from the terminal keyboard
-
Break detection and generation
Meridian programmable data adapter.
This adapter provides the interface (RS-232 compatible) through which
ASCII Data Terminal Equipment (DTE) may be connected to the Meridian
1 network. It is available with the M2006, M2008, M2016S, and M2616
Meridian Modular Telephones
Some of the features available are as follows:
.-
-
keyboard dialing for originating data calls to local or remote hosts or
DTE
-
telephone keypad dialing for originating and releasing data calls
-
-
parameter setting from telephone keypad
-
voice call origination from terminal keyboard
-
script file capabilities to pre-program resource locations via mnemonic
address names
Teledaptm
Teledapt standardized telephone connectorization for QSU-type sets
provides an alternative to the conventional spade tip form of set termination.
QSU-type sets possessing the Teledapt capability are designated by “ QM”
suffix on the set code (i.e., the
QSUlEQM).
while “QM” sets use a 2 m
(7
ft)
cord, the
NED6QF
Teledapt cord assembly may be ordered
Equipment identification and ordering information 553-3001-154