Meridian Data 16i manual Enclosure Chassis Chassis Overview

SecurStor 16i Installation and Hardware Reference Manual

(BBU) is now equipped with an EEPROM that helps record the installation date and notify system administrators if the battery’s life expectancy is reached. The BBU is hot swappable and is accessed through the controller’s faceplate.

Four (4) RJ-45 connectors connect the subsystem to network switches or Ethernet ports of independent devices. Dual-redundant, hot-swappable cooling modules and power supplies protect the subsystem from overheating and the down time by power outage. The modular nature of the subsystem and the easy accessibility to all major components ensure the ease of the subsystem maintenance.

NOTE:

On receiving and unpacking your subsystem, please check the package contents against the included Unpacking Checklist. If any modules are missing, please contact your vendor immediately.

1.1.2Enclosure Chassis

1.1.2.1 Chassis Overview

The SecurStor 16I RAID storage is housed in a 3U metal chassis that is divided into front and rear sections. Key components are respectively accessed through the front (see Figure 1-3) and rear (see Figure 1-4) panels. The enclosure chassis can be mounted into a standard 19-inch rack or enclosure cabinet using support brackets that are separately-purchased.

NOTE:

Components accessed through the front panel are referred to as “Front Panel Components” and components accessed through the rear panel are referred to as “Rear Panel Components.”

1-2