Meridian Data 16i manual Removing a Cooling Module

Chapter 5: Subsystem Maintenance and Upgrading

Step 3-3 Tilt the fan a little bit and remove the fan assembly with a precisely vertical motion.

Figure 5-13: Removing a Cooling Module

Step 4. Install the replacement module by aligning it with the module bay on the PSU module and gently lowering it into. The fan outlet should be aligned with the PSU faceplate and that the side with screw holes should be facing up. Do this with a precisely vertical motion so that the cooling module’s connector can correctly mate with the connector in the module bay.

5-17