Epilson STSTM

2.3.6Characteristics of the Output Contacts

Relay type

Normally Open.

Max. voltage

250VAC, 30VDC.

Max. current

2A.

Cable

4 x 18 AWG, cover plate hole diameter 0.26 inch ± 0.01 inch

Figure 2-4: Output Contacts.

 

6

5

4

3

2

1

B A

2.3.7Characteristics of the Input Contacts

Switched voltage

5 VDC.

Consumption

10 mA.

Cable

4 x 22 AWG, hole diameter 0.2 inch ± 0.02 inch

Output alarms are always activated on the conditions stated unless requested by the customer to operate on other conditions.

Input contacts are designed for remote STS operation. Use extreme caution when using these contacts so as not to endanger persons or compromise the STS load.

CAUTION:

Isolate and lock-out all power sources for this card before

 

making connections. Never connect ELSV (governed by UL1778)

 

and non-ELSV circuits to the different outputs of the same card.

 

 

2 — 6

Installation

86-504004-00 B03