Chapter 5 - Using SETUP
Hard Disk
Configures the Hard Disk Drive 1 (DOS drive C:). Options:
[Disabled] | If no hard drive is installed. |
[Standard] | To select a drive type from a standard list of drives. |
| (44 |
[Custom] | To configure a drive not in the standard list. |
| When selected, you must manually enter the values for |
| cylinders, heads, sectors per track (SPT), landing zone |
| (LZone), and write precompensation (Precomp) for the |
| drive to be recognized. |
Attempts to configure the hard drive parameters for any | |
| supported IDE drive. |
Fast Hard Disk
Enables or disables the turbo IDE interface. When enabled, your system can access the hard disk much more quickly.
61
