Minolta 2210 5, 6, 7, 8, 9, 10 , 11 , Kanji Font Internal IDE Hard Disk

Kanji Font Internal IDE Hard Disk 115
5Open an ftp session at your PC or workstation by typing one of the
following commands:
ftp printername
↵(for example, ftp pctdev6↵)
ftp
ipaddress ↵(for example, ftp 161.33.130.45↵)
6When prompted for a user name and passwo r d, press Enter for both.
An ftp> prompt displays.
7At the ftp> prompt, change to binary mode by typing
bin↵
8At the ftp> prompt, send the fonts file to the printer’s hard disk by typing
put
filename
↵
where filename is the name of the installation file.
The printer’s message window reads 1 Active Job to indicate that the
fonts are being downloaded to the hard disk. The ftp> prompt returns
when the fonts have finished loading.
9At the ftp> prompt, end the ftp session by typing
quit↵
10 When the Disk light stops flashing and the printer’s message window
reads IDLE for at least 30 seconds, turn the printer off and then on again.
11 When the printer’s message window reads IDLE again, the fonts are
ready to use.
The fonts should be listed in the Fonts section of the printer’s Advanced
Status page.
5"
Yo u may want to erase any installation files left on you r compu ter
(and/or workstation), and then remove any temporary directories.
Kanji Font Internal IDE Hard Disk
The preformatted Kanji font internal IDE hard disk contains Kanji fonts and
other files. These fonts can be printed at a va riety of poi nt sizes and in
different styles and resolutions.
After the Kanji hard disk is installed in your magicolor
2210, the Kanji fonts
are available for use just as if they were resident in the printer.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500