Replacing the Fuser Unit and Transfer Roller Kit 25
2Holding the two transfer roller
unit handles, remove the trans-
fer roller unit.
5"
Dispose of it properly
according to your local
regulations.
3Remove the new transfer roller
unit from the fuser kit box.
Attention
Do not touch the surface of the transfer roller
unit. This could lower image quality.
4Place the new transfer roller unit on a
level surface.
5Lift up the two transfer roller unit handles.
6Holding the two transfer roller unit
handles, carefully lower it so the
transfer roller unit shaft goes into
the two transfer roller unit installa-
tion guides .
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500