Minolta 2210 Status, Error, and Service Messages88

Status, Error, and Service Messages88
CREATED FILE The accounting file has been
created. No action needed.
CREATING
XXXXXXXXXXXX
FILE, WAIT...
The spe cified accounti ng file is
created when accounting is
enabled and the files are not in
existence or these files are
created following a Re set
Accounting (
XXXXXXXXXXXX
represents the Job Accounting
or Paper Accounting file).
Wait. No other
action needed.
DSK TOO SMALL
ACC NOT
ENABLED
There is not enough space in
the hard disk to create the
accounting file.
Remove unneces-
sary files stored in
the hard disk.
END JOB The Cancel key has been
pressed and the End Job
option selected.
Press Select to
provide an
end-of-job indica-
tor for a print job
that does not
have one.
ENERGY SAVER The printer is in energy saver
mode to reduce power con-
sumption during periods of
inactivity. When a print job is
received, the printer returns to
normal power within 90 sec-
onds. While in “deep sleep,”
the printer’s message window
will not display operator status
such as door- and tray-open
messages. The printer remains
in “deep sleep,” until a print job
is received, or until the printer
is manually switched from
offline to online.
No action needed.
EXTENDED ACC
FILE SIZE BY
<
X> KB
The < X > (size of the non-
empty accounting file) has
been increased successfully.
No action needed.
This message... means... Do this...
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500