Replacing the Transfer Belt28
Replacing the Transfer Belt
When the transfer belt is at the end of its life, the message “REPLACE
TRANSFER BELT” appears, and the printer does not print. Replace the trans-
fer belt. After the new transfer belt is installed, printing automatically resumes
(if you have not turned off the printer).
1Open the printer’s front cover.
2Remove the waste toner pack.
3Rotate the left transfer belt
lock lever.
4Remove the OPC drum car-
tridge and set it aside.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500