Lower Feeder Unit 131
2With one person holding the carrying bars and another holding the two
grips on the left side of the printer, lift the printer and temporarily move it
to a flat, level surface.
3Remove the lower feeder unit from the shipping carton, and place it where
the printer will be located.
4Slide out the optional media tray from lower feeder unit.
5Remove any tape and
packing material.
6Put media in the optional
tray.
7Slide the optional media
tray all the way into the lower
feeder unit.
5"
If you have removed the
tray from the lower feeder
unit, slightly tilt up the front
of the tray to insert it into
the guide rails to slide it
back in.
8Slightly tilt up the printer’s upper
media tray to remove it.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500