Repack the Printer151
Strapping/Buckling Instructions
1Thread one end of the
strapping through the
wooden pallet.
2Pull the two ends of the
strapping together at the
approximate center of the
top of the printer.
3Thread both ends up
through the center of the buckle.
4Weave the slack of
one end through
the buckle.
5Pull the slack on
that end so
that the strapping
is taut in
the buckle.
6Weave the slack of the other end through the buckle.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500