Replacing the OPC Drum Kit 13

Replacing the OPC Drum Kit

Waste Toner Pack, OPC Drum Cartridge, and Laser Lens

Cover

Attention
The OPC drum is extremely sensitive to bri ght lig ht an d d irect sunli gh t.
Always leave it in its protective bag until you’re ready to install it. Any
exposure to light should be avoided, or permanent damage could
result. Any damage resulting from mishandling of the OPC drum will
void the warranty of the OPC drum. Also, handle the cartridge carefully
by its sides so you don ’t touch th e surface (the g reen part) of th e drum.
The drum is also extremely sensi tive to hand oils and scratches, both of
which reduce print quality.
The three items below are included in the OPC drum kit. If one needs
replacing, replace all three items.
„Waste toner pack
„OPC drum cartridge
„Laser lens cover
The steps are
„Removing the used waste toner pack
„Removing the used OPC drum cartridge
„Replacing the laser lens cover
„Installing the new OPC drum cartridge
„Installing the new waste toner pack

Removing the Used Waste Toner Pack

When you replace the OPC drum cartridge, the printer automatically recov-
ers. However , the replaced waste toner pack consumables monitoring system
must be manually reset through control panel (Operator Control/
Consumables/Items Replaced) menu.
1Open the printer’s front cover.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500