Remove the Cables 146
3Remove the toner cartridges.
4Remove the waste toner pack.
5Remove the OPC drum.
6Remove the transfer belt.
7Remove the duplex unit (if attached).
8Remove the 5-bin mailbox (if attached).
9Remove the lower input feeder (if attached).
10 Repack the printer for shipment.
To avoid toner contamination during shipment, the printer should be repacked
without the fuser oil roller, toner cartridges, waste toner pack, OPC drum car-
tridge, or transfer belt installed.
Remove the Cables
1Turn off the printer.
2Remove the power cable and all interface cables.
Remove the Fuser Oil Roller
WARNING!
The fuser unit can become extremely hot and cause severe
burns. Make sure the unit is cool before handling it.
ACHTUNG! Die Fixiereinheit kann sehr heiß werden, so daß
Verbrennungsgefahr besteht. Bitte lassen Sie die Fixiereinheit einige
Zeit abühlen, bevor Sie diese berühren.Open the printer’s top cover.
3Rotate the two lock levers to release the fuser oil roller.
4Remove the fuser oil roller.
5Store the fuser oil roller in its original shipping bag.
6Close the printer’s top cover.
Remove the Toner Cartridges
1Open the printer’s front cover.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500