Replacing the OPC Drum Kit18

2Hold the OPC drum car-
tridge level, place the front
end of the OPC drum car-
tridge installation guide
into the installation rail.
3Carefully push the OPC
drum cartridge in.
Attention
The cartridge should slide easily into the printer. Don’t force it.
4Press on the front handle of the
OPC drum cartridge with one hand
and hold the front handle of the
OPC protective cover with the
other hand.
5Peel the protective cover off
(straight toward you).
5"
Dispose of it properly
according to your local
regulations.
6Turn the left release lever of the
transfer belt clockwise to its cor-
rect position (2 o’clock).
This lowers the transfer belt.
Also make sure the transfer belt
right release lever is set to its
correct position (10 o’clock).
Attention
If the transfer belt left release lever is at its top position (12 o’cl ock),
the waste toner pack cannot be installed.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500