Minolta 2210 Status, Error, and Service Messages 91

Status, Error, and Service Messages 91
MEDIA JAM
OPTIONAL TRAY Tray jams occur between the standard upper or optional tray
and the print engine. A misfeed
jam may be as simple as a
sheet of media not being
picked, or it may be that the
media was picked but not fe d
properly.
Locate and
remove the jam.
The lower feeder unit (optional)
door is open. Close the door.
MEDIA JAM
TRANSFER Transfer jams occur in the transfer roller area. This type
of jam means that the media
did not make it to the paper
exit area.
Locate and
remove the jam.
MEDIA JAM
UPPER TRAY Media has jammed while being pulled from the specified tray.
MEDIA SIZE
MISMATCH The media detected in the tray doesn’t match the media si ze
setting.
Change the media
in the tray or
change the media
size setting.
NEW FILE SIZE
IN EFFECT The size of the accounting files has been increased or
decreased.
Press Select to
accept changes.
NO PRNTREQ
ERROR A printer hardware error has occurred. Reboot printer. If message contin-
ues to appear,
contact your ser-
vice provider or
Support. See the
Service & Suuport
Guide
for support
telephone num-
bers.
ONLINE The printer is online and ready
to print. No action needed.
This message... means... Do this...
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500