Maintaining the Printer 49

Do not put a cover on the printer immediately after using it. T urn it off and
wait until it cools down.
Do not leave the printer’s covers open for any length of time, especially in
well-lit places; light may damage the OPC drum cartridge.
Do not open the printer du ring printing.
Do not tap paper stacks on the printer.
Do not tilt, lubricate, or disassemble the printer.
Do not touch the electrical contacts, gears, or laser beam devices. Doing
so may damage the printer and cause the print quality to deteriorate .
Keep media in the output tray at minimum level. If the media stacks too
high, your printer may experience media jams and excessive media cu rl.
Lift the printer from the bottom only, using the carrying grips and the
carrying bars. Make sure two people are available to lift the prin ter when
moving it.
When moving the printer, keep the printer level to avoid toner spillage.
If you get toner on your skin, wash it off with cool water and neutral
detergent.
WARNING!
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor. Material Safety Data Sheets (MSDS) information
can be found at www.minolta-qms.com (click on the Answer Base).
ACHTUNG! Sollte Toner in Ihre Augen gelangen, die Augen unbedingt
sofort mit kaltem Wasser ausspülen und einen Artzt aufsuchen.
MSDS-Informationen (Material Safety Data Sheets; Datenblätter zur
Materialsicherheit) finden Sie im Internet unter www.minolta-qms.com
(klicken Sie auf “Answer Base”). Read all caution and warning labels
carefully, making sure to follow any instructions contained in them.
These labels are located on the inside of the printer’s covers and the
interior of the printer body.
Make sure any parts removed during cleaning are replaced before you
plug in the printer.
See
“Repacking the Printer” on page 143
for printer storing and shipping
instructions.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500