Clearing Media Jams56

Attention
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the print face when removing the jammed media.
Make sure not to spill any toner inside the printer. Unfused toner can
dirty your hands, clothes, or anything else it gets on. If you accidentally
get toner on your hands, wash them in cool water. If you accidentally
get toner on your clothes, lightly dust them off as much as possible. If
some toner remains on your clothes, use cool, not hot water, to rinse
the toner off, provided your clothing is washable. If toner gets on your
skin, wash it off with water or a neutral detergent.
WARNING!
If you get toner in your eyes, wash it out immediately and consult a
doctor. Material Safety Data Sheets (MSDS) information can be found at
www.minolta-qms.com (click on the Answer Base).
ACHTUNG! Sollte Toner in Ihre Augen gelangen, die Augen unbedingt
sofort mit kaltem Wasser ausspülen und einen Artzt aufsuchen.
MSDS-Informationen (Material Safety Data Sheets; Datenblätter zur
Materialsicherheit) finden Sie im Internet unter www.minolta-qms.com
(klicken Sie auf “Answer Base”).
If, after clearing the media jam, the jam message in the control panel window
persists, open and close the printer’s covers. This should clear the jam
message.

Handling Media Jams by Location

Location of Jam Page Reference
Tray 1—multipurpose tray Page 58
Tray 2—upper tray
Tray 5—optiona l tray (lower feeder unit) Page 57
Near the OPC drum Page 59
Near the duplex unit Page 62
In the mailbox Page 65
In the output tray Page 66
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500