Clearing Media Jams60
4Close the right-side cover.
The media jam message is no longer displayed in the printer message
window.
5Check the release button to make sure the cover is securely closed.
6If media was removed in step 1, open the multipur pose tray.
7Shuffle the media that was removed in
step 1 and even up the fron t edges.
8Reinsert the media printing face down.
Make sure the media is lying flat and
doesn’t exceed the media limit mark.
Check to see if the media width guides
are correct.
Media Jams near the Duplex Unit (Optional)
1Open the top cover.
Attention
Do not pull jammed media from
the top of the printer through the
fusing rollers.
This prevents any unfused toner
from dirtying the fuser rollers.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500