Replacing the Fuser Unit and Transfer Roller Kit 21

4Place the fuser oil roller on a table or level surface.
Attention
Since the fuser oil roller removed here is
to be installed in the new fuser unit,
handle it with care.
If you set the fuser oil roller on the table
do it as shown in the illustration. Do not
allow the roller surface to contact the
table or get dirty. This could lower image quality.
5Turn the release levers
(front, rear) to release
the fuser unit.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500