7.2 Restoring Last State

Follow this procedure to restore your Pocket PC to the last state when your Pocket PC does not respond after being reset.

1.Disconnect all cables, including the AC adapter, from your Pocket PC.

2.Remove the battery cover and the battery.

3.Slide the ON/OFF switch to the OFF (right) position.

4.Wait for 1 minute and then slide the switch back to the ON (left) position.

Wait for 1 minute.

5. Replace the battery and its cover.

NOTE: You need to restore your Pocket PC to factory default state if you have set up a password but forget it. Restoring factory default state means all data you have entered in RAM, including all files, system settings, and additional programs you have installed, will be erased. Ask an authorized service personnel for help if you need to restore your Pocket PC to factory default state.

98

Page 106
Image 106
Mio A201 manual Restoring Last State