Mitsubishi Electronics PCH30GK OC277-50, Variety of System Control Functions, PAC-SA89TA-E

11	SYSTEM CONTROL
1. VARIETY OF SYSTEM CONTROL FUNCTIONS
1 Group control with					Many units, installed at different locations, can be started
					and controlled with a single remote controller. The remote
a single remote
					controller can be mounted in a different location using a
controller
					non-polar two-wire cable, which can be extended up to
(See page OC277-
		Unit	Unit	Unit	500m. A maximum of 50 units can be controlled with a
51.)
		Remote			single remote controller. All units operate in the same
		controller			mode.
2 Control using two					Two remote controllers can be used to control either one
					unit or a group of units. Units can then be controlled from
remote controllers
					a distance or at close range. Units operate according to
(See page OC277-
					the latest command from either remote controller.
52.)		Unit	Unit	Unit
		Remote
		controller
3 Both remote		Optional			All units can be turned on or off simultaneously using a
		adapter			remote ON-OFF switch. Also, each unit can be controlled
ON/OFF and indi-				Relay box
					individually by each remote controller. Dunning remote
vidual controls
(See page OC277-					ON-OFF control, a message of “CENTRALLY CON-
52.)				Unit	TROLLED” is displayed on the LCD of the remote con-
w Timer adapter					troller.
(PAC-SA89TA-E)		Remote	Remote		This is available for both one unit control and several units
is needed.		ON/OFF	controller		control.
		switch

4 Individual control				By grouping the remote controllers in one place, several
				units installed at different locations can be controlled indi-
by grouping
				vidually, and operation conditions of all units are visible
remote controllers
				without a special control board. The control method is the
(See page OC277-	Unit	Unit	Unit
53.)				same as that of the single unit with a single remote con-
				troller.
	Remote
	controller

5 Multiple remote						Several units can be controlled with a remote control dis-
						play board. Operation conditions of all the units are visi-
control display
						ble with the remote control display board.
(See page OC277-
54.)						Individual control by each remote controller is also possi-
		Unit		Unit	Unit
w Multiple display						ble.
adapter	Remote control
			Remote
(PAC-SA88HA-E)
is needed.	display board		controller
6 Auto restart func-						A unit can be started or stopped with the circuit breaker
						on or off.
tion	Circuit breaker
						Remote controller is also available.
(See page OC277-
						With this function, when the power is restored after power
54.)
				Remote		failure, the unit will restart automatically. (However, when
						the remote controller POWER ON/OFF button is OFF, the
				controller
						unit will not start.)

OC277-50