Mitsubishi Electronics PCH36GK, PCH24GK, PCH30GK OC277-69, Refrigerant Pipes, Timer Adapter

2. REFRIGERANT PIPES

Service Ref. : PCH24GK

Part No.		PACSK03FS		PACSK05FS	PACSK07FS		PACSK10FS	PACSK15FS
Pipe length	(ft.)	10		16	23		33	49
Pipe size O.D.(in.)	(in.)			Liquid:[3/8		Gas:[5/8
Connection method				Indoor unit: Flared		Outdoor unit: Flared
Service Ref. : PCH30/36GK
Part No.		PACSK03FF		PACSK05FF	PACSK07FF		PACSK10FF	PACSK15FF
Pipe length	(ft.)	10		16	23		33	49
Pipe size O.D.(in.)	(in.)			Liquid:[1/2		Gas:[3/4
Connection method				Indoor unit: Flared		Outdoor unit: Flared
Service Ref. : PCH42GK
Part No.			PACSK07FK				PACSK15FK
Pipe length	(ft.)		23				49
Pipe size O.D.(in.)	(in.)			Liquid:[1/2		Gas:[7/8
Connection method				Indoor unit: Flared		Outdoor unit: Flared

Note 1. The refrigerant pipes and the indoor unit contain a nitrogen holding charge which must be removed by evacuation. <Piping connection procedures>

See that ball valve on outdoor unit is fully shut (unit is shipped with valve shut). Remove caps from piping and unit and make flare connection promptly. Repeat for each connection, one at a time.

After all piping connections between indoor and outdoor unit have been completed, vacuum-purge air from system through the service port for the ball valve on the outdoor unit.

Note 2. The following parts are contained in optional refrigerant piping kit.

Heat insulating cover, vinyl tapes, nipples, sleeve and flange (for wall hole), connecting cables etc.

3. TIMER ADAPTER

This adapter is needed for system control and for operation via external contacts.

Part No.

PAC-SA89TA-E

4. MULTIPLE REMOTE CONTROLLER ADAPTER

This adapter is needed for remote indication (operation/check).

Part No.

PAC-SA88HA-E

OC277-69