Edit NetCommand®, Adding an A/V Receiver, continued
Name Screen
Figure 10
The Name screen allows you to change the default name for the A/V Receiver to a custom name of up to eight characters (including a blank space), selecting from letters, numbers, and nine different characters. Using the TV’s remote, press ADJUST 
or 
to select each letter, then press ENTER to move to the next position. Press CANCEL to delete the current letter and move back one character position. When in the first position, the CANCEL button will return the name to the default name.
Monitor Out to AVR Screen
Figure 11
Use this screen to select the input on the A/V Receiver that is connected to Monitor Output, Audio 2 on the television.
Note: Monitor Output, Audio Video 1 is for analog recordings with a VCR.
| Figure 11. Monitor Out to AVR screen |
Figure 10. Name screen | Finish Screen |
| Figure 12 |
| To finalize your selections and complete the A/V |
| Receiver setup, select Finish from the Finish screen. |
| Note: If you connected individual devices audio |
| output directly to the A/V Receiver, you must |
| use the “Change” function of Edit NetCommand |
| and select the individual device to assign the |
| correct A/V Receiver input to be used with each |
| device. |
Figure 12. Finish screen
37
