Mitsubishi Electronics WS-65517 manual Appendix G, Diamond Shield Installation for Model WS-73517

Appendix G, continued: Diamond Shield™ Installation for Model WS-73517

The Diamond Shield for the WS-73517 comes in a	Clips are shown
separate package. To install:
	lighter for clarity

1.Snap open the molding clips on the right and left side of the screen. The side closest to the screen opens. Unsnap the top, bottom and middle, preferably in that order (the clips are fixed to the TV and are not detachable). Do not force the clips, they should open easily.

2.Carefully remove the Diamond Shield from the protective packaging. Wipe off any dust with a lint-free cloth. Do not use any cleaners on the anti-glare Diamond Shield.

3.Insert the shield by sliding it into the bottom channel. Gently bow the Diamond Shield toward you and insert the top of the Diamond Shield into the top channel.

Open	Closed
molding	molding
clip	clip
Opening the
molding clip

4. Snap the molding clips closed, starting with the top	Step 1. WS-73517 Snapping Open the Molding Clips
or bottom. Do not force the clips. This completes
the Diamond Shield installation.
To remove the Diamond Shield, reverse this process.

For additional assistance, call

(800) 332-2119. Step 2.WS-73517 Diamond Shield installation

WARNING

Sharp edges! Always wear gloves to handle, lift, remove and install the Diamond Shield and molding clips.

87