Antenna Menu
Antenna Menu
Figure 16
Figure 16. Antenna Menu
Antenna Menu
The Antenna Menu options are available for use with analog and digital channels on
2.You can memorize, add or delete, name and add channels to an SQV (Super Quick View™) list.
Memorize
For Antenna-1 (Main) or Antenna-2 (Aux)
Select either Air (when used with an indoor/outdoor antenna) or Cable (when used with direct cable) then press ENTER to start the automatic channel memorization process. If a CableCARD is being used, memorized channels are provided by your cable provider through the CableCARD.
To stop the automatic channel memorization process, press CANCEL. Channels memorized before you pressed CANCEL are retained in memory.
After memorizing channels, the channels in the memory can be accessed in ascending or descending order or by pressing CH 
or 
.
The memorization will occur twice, as the TV memorizes analog and digital channels separately.
Prefer Digital
If a memorized channel is shown both as an analog and digital channel, a check mark in the Prefer Digital box will show the digital and hide the analog channels, when using CH. Removing the checkmark will show both analog and digital choices.
Channel
For additional Channel editing, press ADJUST 
or 
to select the channel or press CH 
or 
for channels already in memory. Channels can also be selected by using the number buttons. To immediately tune to the listed channel, press ENTER after entering the number(s).
For digital channels, when the broadcaster has sent a virtual channel number, the virtual channel number is shown in the text box and the original digital channel is shown below
Memory
After the available channels have been memorized with Memorize, weaker channels can be added. Unwanted channels can also be deleted. Press CH 
or 
on the remote control to see the channels in memory. Press ADJUST 
or 
to select Added or Deleted for the channel shown in the Channel number box.
Name
Analog channels shown on
1.Press ADJUST 
or 
to select each letter.
2.Press ENTER to set the letter and move to the next letter position.
3.Press CANCEL to move back one position.
Digital channels are automatically named if the broadcaster sends the information.
60
