Mitsubishi Electronics WS-55517, WS-65517 manual Operation of PIP and POP, Changing PIP/POP Device

Operation of PIP and POP

You can display programs from analog channels, analog inputs or devices as Picture-In-Picture (PIP) and Picture- Outside-Picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on Ant-1 and will display them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture but cannot be the sub-picture. PC screens can be viewed in the side-by-side mode.

Press PIP/POP to activate. With each press of PIP/ POP on the TV remote control (within 3 seconds of each other), PIP/POP will cycle through the following display options:

PIP/POP can be turned off, 10 seconds after displaying, by pressing PIP/POP. The next time you activate PIP/ POP, the last used PIP/POP option will be displayed

MAIN

PICTURE

Side-by-Side

•POP

side-by-side

pictures

Changing PIP/POP Device

Press PIP DEVICE to change the PIP or POP picture source device. A menu similar to the Device Selection menu will be displayed. Not all devices can be displayed.

Changing PIP/Side-by-Side Channels

	POP 1
MAIN
	POP 2
PICTURE
	POP 3

	POP 1	POP 2	POP 3
MAIN
	POP 4	POP 5	POP 6
PICTURE
	POP 7	POP 8	POP 9
Ant-1 2 XXXX		PIP Ant-1 17
Standard
Stereo SAP
TV-PG DLSV
SQV1

	Press PIP CH to scroll up and down through
	memorized channels on Ant-1 and Ant-2.
	Exchanging Program Images
• 3 POP	Press EXCH to exchange the main picture and the PIP/
	POP picture. This feature is only for analog pictures.
	Moving PIP Image
	If no menus are on the screen, press ADJUST , ,
	or to move the PIP display anywhere on the main
	screen.
• 9 POP	Automatic POP Switching
	When automatic POP switching is active, the TV will
	cycle through memorized channels on Ant-1 or Ant-2 or
	strobe pictures from other A/V components in the POP
	display. Press PAUSE to pause or restart automatic
	POP switching.

	PIP
Ant-1 2 XXXX	PIP Ant-1 17
Standard
Stereo SAP

TV-PG DLSV

SQV1

PIP

Ant-1 2 XXXX

Standard

Stereo SAP

TV-PG DLSV

SQV1

• PIP large

• PIP small

• PIP/POP: off

Selecting POP “Live” Image

Press ADJUST , , or to select a different POP “live” image (automatic POP switching must be paused.)

Freezing the PIP and Side-By-Side Picture

Press PAUSE to freeze the PIP and side-by-side images. Press PAUSE again to return to a “live” image.

IMPORTANT

Side-by-Side cannot show the same channel or device on both screens.

When Ant-1 or Ant-2 is the main picture, Ant-2 is not available as the PIP, POP or Side-by-Side.

HDMI and DVI devices can be the main picture only.

PIP/POP is not compatible with signals from IEEE 1394 or some digital channels.

74