Setting up the system

The tablet is self-contained, so you can start using it immediately. If you are using a Docking Station, refer to the instructions that came with the docking station. Use the following steps to get started.

For safety information, see the Safety and Regulatory Guide packaged with the system.

Step 1: Plug in the power adapter

Plug the power cord into the power adapter and the tablet, then plug the power cord into an outlet.

Note: You should keep the system plugged in until the battery is fully charged.

Step 2: Turn on the system

Press the power button.

As the system starts, the light on the power button comes on.

Windows Vista. The first time Windows starts, the Windows Vista Welcome Center appears. If you do not want this screen to appear every time you start the computer, clear the Run at startup check box. To return to the Welcome Center later, go to System and Maintenance in Control Panel.

Chapter 1 Getting Started

5

Page 11
Image 11
Motion Computing GU3K2722, C5, F5 manual Setting up the system, Plug in the power adapter