To set the transmission mode:
1.Select 
from the menu wheel.
2.Select the transmission mode:
Send/Receive ¾ Full Service coverage. Turns on the receiver and transmitter for
Receive Only ¾ Basic Service coverage. Turns on only the receiver for
Off ¾ Storing Messages. Turns off the transmitter and receiver. Messages cannot be sent or received.
TIP 
Sometimes referred to as Hospital mode. The unit will never transmit while in this safe mode for environments with sensitive equipment such as CAT Scan and MRI equipment found in hospitals.
Off is recommended for airline travel. Radio transmissions can interfere with flight navigation and communications. Follow FAA regulations. Turn off the transmitter while on airplanes.
3.Select 
to return to the main screen.
When the pager is in Off mode, messages are retained by the paging service until you change modes (Send/Receive or Receive Only).
TIP Off mode does not turn off your pager. It turns off the radio frequency (RF) transmission. You can still use the applications on your pager to update your Address Book, schedule reminders to yourself, or compose messages to be sent at a later time.
TIP When moving to another zone, reset your pager back to Full Service Send/Receive mode until you receive your first page, then you can put the pager back into Receive Only mode. This allows you to tell the service provider where to find your pager. Zones are defined by the paging service provider, but in general, a major metropolitan area counts as a zone (e.g., the greater Chicago area
is one zone).
