Motorola 2000X quick start Battery and Charger, Charger’s LED doesn’t light. What should I do?

Battery and Charger

The charger’s LED doesn’t light. What should I do?

Use the following procedure to find the cause:

1.Check that your pager, or the battery alone, is inserted into the charger correctly. See “The Battery and Charger” on page 11 for instructions.

2.Unplug the transformer from the AC power supply.

3.Remove the pager (or battery) from the charger, then use an ordinary pencil eraser to clean the six metal contacts on the charger and the pager (or battery).

4.Plug the transformer back into the AC power supply to restore the power.

5.Re-insert the pager or battery into the charger. If the charger’s LED still does not light, have the charger checked by an authorized service technician.

What does a flashing red indicator light on the charger mean?

The red flashing indicator light can mean one of four situations:

∙The battery or pager may be seated improperly in the charger. Ensure the battery or pager is properly inserted.

∙The battery voltage has remained low for too long a period of time and the battery cannot be recharged. Dispose of the battery properly and purchase a new battery.

∙The battery temperature is outside the normal charging range. Remove the battery and re-insert. If flashing continues, remove the battery, wait one hour, and re- insert. If flashing continues replace battery or have the charger checked by an authorized service technician.

∙Insufficient power is being delivered by the transformer. Plug the transformer into another power source.

∙If the insufficient power is not corrected by changing the power source, the charger might be malfunctioning. Have the charger checked by an authorized service technician.

Commonly Asked Questions 81