Moxa Technologies MOXA AirWorks, AWK-1100 guide

MOXA AirWorks AWK-1100 User’s Manual

Web Console Configuration

3.Configure the IP address of the computer so that the AWK-1100 and the computer are on the same IP subnet.

4.On the computer, run the TFTP Server utility, and specify the folder in which the firmware files will be placed.

5.On the computer, run a Web browser and click the General, Firmware Tools hyperlink.

6.Choose TFTP as the Firmware management protocol.

7.Specify the IP address of the computer, which acts as a TFTP server. If you don’t know the IP address of the computer, open a Command Prompt, and type ipconfig, then press the Enter key.

8.Trigger the firmware upgrade process by clicking Upgrade.

NOTE	After the dialog box of the TFTP server program appears, be sure to specify the working folder
	within which the downloaded firmware files reside.
	Make sure the Accept read requests check box of the TFTP Server is selected.
	The LAN IP address of the AP and the IP address of the TFTP server must be on the same IP
	subnet for TFTP to work.
	Due to the unreliable nature of wireless media, it is highly recommended that the TFTP server
	and the wireless AP that is being upgraded are connected by Ethernet on the same LAN. Doing so
	will help ensure a much smoother upgrade process.
	After the firmware is upgraded, be sure to delete the contents of the Web browser cache so that
	the Web management pages can be shown correctly.
	A failed upgrade may corrupt the firmware and cause the AWK-1100 to fail. When this occurs,
	contact MOXA technical support for assistance.

3-8

Image 24

Moxa Technologies MOXA AirWorks, AWK-1100 user manual Choose Tftp as the Firmware management protocol

Contents

Moxa AirWorks AWK-1100 User’s Manual First Edition, July Copyright Notice TrademarksDisclaimer Table of Contents Page Introduction Package Checklist Product FeaturesProduct Specifications Overview Mechanical Page ‰ Confirming the Settings of the AP and Client Computers Getting Started First-Time Installation and Configuration Select the Operational Mode for AWK-1100 AP/BridgeAP Client Configure AWK-1100’s Ieee 802.11 settings Review and Apply Settings Deploying the Access Point AP Setting up Client ComputersConfiguring Ieee 802.11g-related Settings Confirming the Settings of the AP and Client Computers Configuring TCP/IP-related SettingsChecking if the Ieee 802.11g-related Settings Work Checking if the TCP/IP-related Settings Work To check if a client computer can assess the InternetPage Web Console Configuration ‰ Viewing Status Menu Structure Save, Save & Restart, and Cancel Buttons Home and Refresh Buttons Associated Wireless Clients Viewing StatusCurrent Dhcp Mappings System Log Link Monitor AP Client mode only Specifying the Operational ModeGeneral Operations STA-AP Administrative Password Managing the FirmwareUpgrading Firmware by Http AP/Bridge AP Client Backing up and Restoring Configuration Settings by Http Upgrading Firmware by Tftp Choose Tftp as the Firmware management protocol Backing up and Restoring Configuration Settings by Tftp Configuring TCP/IP-related Settings Resetting the Configuration to Factory DefaultsAddressing Dhcp Server AP/Bridge modes only BasicStatic Dhcp Mappings Configuring Ieee 802.11g-related Settings CommunicationLink Integrity Wireless Distribution System Association ControlAP Load Balancing Sample wireless bridge network topology Security STA Shared Key , and Auto MAC-Address-Based Access Control Set the Access control type to exclusiveSet the Access control type to inclusive Ieee 802.1X/RADIUS AP mode only Click Download Internet Configuring Advanced Settings Packet FiltersEthernet Type Filters IP Protocol Filters Management TCP/UDP Port FiltersUPnP System Log Snmp Page Default Settings LAN Interface ManagementSnmp read community Snmp write community Troubleshooting Wireless Settings ProblemsWireless client computer cannot associate with an AWK-1100 TCP/IP Settings Problems AP does not respond to ping from the client computer Unknown Problems Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Federal Communication Commission Interference StatementTTE Compliance Statement Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Service Information Moxa Internet Services Following services are provided Problem Report Form Moxa Product † AWK-1100-US † AWK-1100-EU Serial Number Product Return Procedure