Introduction | Moxa Technologies AWK-1100, MOXA AirWorks manual

1

Introduction

MOXA AirWorks AWK-1100 enables wireless users to access network resources wirelessly. AWK-1100 can authenticate and authorize wireless users by IEEE 802.1X and RADIUS, and communicate with a back-end RADIUS (Remote Authentication User Dial-In Service) server to determine if a wireless user is allowed to access the wireless network..

The following topics are covered in this chapter:

Overview

Package Checklist

Product Features

Product Specifications

Image 5

Moxa Technologies AWK-1100, MOXA AirWorks user manual Introduction

Contents

First Edition, July Moxa AirWorks AWK-1100 User’s Manual Disclaimer Copyright NoticeTrademarks Table of Contents Page Introduction Product Features Package ChecklistProduct Specifications Overview Mechanical Page Getting Started ‰ Confirming the Settings of the AP and Client Computers First-Time Installation and Configuration AP Client Select the Operational Mode for AWK-1100AP/Bridge Review and Apply Settings Configure AWK-1100’s Ieee 802.11 settings Configuring Ieee 802.11g-related Settings Deploying the Access Point APSetting up Client Computers Checking if the Ieee 802.11g-related Settings Work Confirming the Settings of the AP and Client ComputersConfiguring TCP/IP-related Settings To check if a client computer can assess the Internet Checking if the TCP/IP-related Settings WorkPage ‰ Viewing Status Web Console Configuration Menu Structure Home and Refresh Buttons Save, Save & Restart, and Cancel Buttons Viewing Status Associated Wireless ClientsCurrent Dhcp Mappings System Log Specifying the Operational Mode Link Monitor AP Client mode onlyGeneral Operations STA-AP Managing the Firmware Administrative PasswordUpgrading Firmware by Http AP/Bridge AP Client Upgrading Firmware by Tftp Backing up and Restoring Configuration Settings by Http Choose Tftp as the Firmware management protocol Backing up and Restoring Configuration Settings by Tftp Addressing Configuring TCP/IP-related SettingsResetting the Configuration to Factory Defaults Static Dhcp Mappings Dhcp Server AP/Bridge modes onlyBasic Link Integrity Configuring Ieee 802.11g-related SettingsCommunication AP Load Balancing Wireless Distribution SystemAssociation Control Sample wireless bridge network topology Security STA Shared Key , and Auto Set the Access control type to inclusive MAC-Address-Based Access ControlSet the Access control type to exclusive Click Download Ieee 802.1X/RADIUS AP mode only Internet Packet Filters Configuring Advanced SettingsEthernet Type Filters IP Protocol Filters TCP/UDP Port Filters ManagementUPnP System Log Snmp Page Default Settings Management LAN InterfaceSnmp read community Snmp write community Wireless client computer cannot associate with an AWK-1100 TroubleshootingWireless Settings Problems AP does not respond to ping from the client computer TCP/IP Settings Problems Unknown Problems Moxa AirWorks AWK-1100 User’s Manual TTE Compliance Statement Regulatory StatementFederal Communication Commission Interference Statement Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Service Information Following services are provided Moxa Internet Services Moxa Product † AWK-1100-US † AWK-1100-EU Serial Number Problem Report Form Product Return Procedure