LAN Interface, Management | Moxa Technologies MOXA AirWorks specification

MOXA AirWorks AWK-1100 User’s Manual		Default Settings

	LAN Interface
	Method of obtaining an IP Address	Set manually
	IP Address	192.168.127.253
	Subnet Mask	255.255.255.0
	Default Gateway	0.0.0.0
	DHCP Server	Disabled
	Management
	UPnP	Enabled
	System Log	Local Log
	SNMP	Enabled
	SNMP read community	public
	SNMP write community	private
	TELNET	Enabled

A-2

Image 42

Moxa Technologies MOXA AirWorks, AWK-1100 user manual LAN Interface, Management, Snmp read community, Snmp write community

Contents

Moxa AirWorks AWK-1100 User’s Manual First Edition, July Copyright Notice TrademarksDisclaimer Table of Contents Page Introduction Product Specifications Package ChecklistProduct Features Overview Mechanical Page ‰ Confirming the Settings of the AP and Client Computers Getting Started First-Time Installation and Configuration Select the Operational Mode for AWK-1100 AP/BridgeAP Client Configure AWK-1100’s Ieee 802.11 settings Review and Apply Settings Deploying the Access Point AP Setting up Client ComputersConfiguring Ieee 802.11g-related Settings Confirming the Settings of the AP and Client Computers Configuring TCP/IP-related SettingsChecking if the Ieee 802.11g-related Settings Work Checking if the TCP/IP-related Settings Work To check if a client computer can assess the InternetPage Web Console Configuration ‰ Viewing Status Menu Structure Save, Save & Restart, and Cancel Buttons Home and Refresh Buttons Current Dhcp Mappings Associated Wireless ClientsViewing Status System Log General Operations Link Monitor AP Client mode onlySpecifying the Operational Mode STA-AP Upgrading Firmware by Http Administrative PasswordManaging the Firmware AP/Bridge AP Client Backing up and Restoring Configuration Settings by Http Upgrading Firmware by Tftp Choose Tftp as the Firmware management protocol Backing up and Restoring Configuration Settings by Tftp Configuring TCP/IP-related Settings Resetting the Configuration to Factory DefaultsAddressing Dhcp Server AP/Bridge modes only BasicStatic Dhcp Mappings Configuring Ieee 802.11g-related Settings CommunicationLink Integrity Wireless Distribution System Association ControlAP Load Balancing Sample wireless bridge network topology Security STA Shared Key , and Auto MAC-Address-Based Access Control Set the Access control type to exclusiveSet the Access control type to inclusive Ieee 802.1X/RADIUS AP mode only Click Download Internet Ethernet Type Filters Configuring Advanced SettingsPacket Filters IP Protocol Filters UPnP ManagementTCP/UDP Port Filters System Log Snmp Page Default Settings Snmp read community LAN InterfaceManagement Snmp write community Troubleshooting Wireless Settings ProblemsWireless client computer cannot associate with an AWK-1100 TCP/IP Settings Problems AP does not respond to ping from the client computer Unknown Problems Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Federal Communication Commission Interference StatementTTE Compliance Statement Moxa AirWorks AWK-1100 User’s Manual Regulatory Statement Service Information Moxa Internet Services Following services are provided Problem Report Form Moxa Product † AWK-1100-US † AWK-1100-EU Serial Number Product Return Procedure