Moxa Technologies AWK-1100 Dhcp Server AP/Bridge modes only, Basic, Static Dhcp Mappings

MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration

DHCP Server (AP/Bridge modes only)

Basic

	AWK-1100 can assign IP addresses to client computers automatically by DHCP. In this section of
	the management page, you can specify the Default gateway, Subnet mask, Primary DNS server,
	and Secondary DNS server settings that will be sent to a client at its request. Additionally, you
	can specify the first IP address that will be assigned to the clients and the number of allocateable
	IP addresses.
NOTE	There should only be one DHCP server on the LAN; otherwise, DHCP will not work properly. If
	there already is a DHCP server on the LAN, disable the DHCP server functionality of the
	AWK-1100.
	By default the DHCP server function is disabled.

Static DHCP Mappings

IP addresses of servers are often static so that clients can always locate the servers by the static IP addresses. By using Static DHCP Mappings, you can ensure that a host will get the same IP address when it requests one from the DHCP server. Therefore, instead of configuring the IP address of an intranet server manually, you can configure the server to obtain an IP address by DHCP so that it is always assigned the same IP address.

3-11