Moxa Technologies MOXA AirWorks, AWK-1100 Management, TCP/UDP Port Filters, UPnP, System Log

MOXA AirWorks AWK-1100 User’s Manual Web Console Configuration

TCP/UDP Port Filters

The destination port field of the TCP or UDP header of a packet incoming from the WLAN or Ethernet interface is inspected for filtering. As a rule, specify the decimal Destination Port, Protocol type (TCP/UDP), and the name of the higher-level protocol (Application Name).

Management

UPnP

UPnP (Universal Plug and Play) enables a Windows XP user to discover peripheral devices automatically by HTTP. When the UPnP functionality is enabled, you can see the AP in My Network Places of Windows XP. The AWK-1100 can be given a friend name that will be shown in My Network Places. Double-clickingthe icon in My Network Places that stands for the AP will launch the default Web browser for you to configure the AWK-1100.

System Log

System events can be logged to the on-board RAM of the AWK-1100 (Local log) or sent to a remote computer on which an SNMP trap monitor program runs (Remote log by SNMP trap). See the next subsection for more information about SNMP trap settings.

The system events are divided into the following categories:

yGeneral: system and network connectivity status changes.

yBuilt-in AP: wireless client association and WEP authentication status changes.

yMIB II traps: Cold Start, Warm Start, Link Up, Link Down and SNMP Authentication Failure.

yRADIUS user authentication: RADIUS user authentication status changes.

3-22