Safety Information
TRaNSpORTiNg SafeTY
CaUTiON
NeveR allow any person or animal to stand underneath the equipment while lifting.
NOTICE
Before lifting, make sure that the equipment parts are not damaged and screws are not loose or missing.
ALWAYS make sure forklift forks are inserted into pockets (if applicable) as far as possible when lifting the pump.
ALWAYS shutdown engine before transporting.
NeveR lift the equipment while the engine is running.
Tighten fuel tank cap securel to prevent fuel from spilling.
Use one point suspension hook and lift straight upwards.
DO NOT lift machine to unnecessary heights.
ALWAYS tie down equipment during transport by securing the equipment with straps, rope or chains.
TOWiNg SafeTY
CaUTiON
Check with your local county or state safety towing regulations, in addition to meeting
Department of Transportation (DOT) SafetyTowing Regulations, before towing your generator.
In order to reduce the possibility of an accident while transporting the generator on public roads, ALWAYS make sure the trailer that supports the pump and the towing vehicle are mechanically sound and in good operating condition.
ALWAYS shutdown engine before transporting
Make sure the hitch and coupling of the towing vehicle are rated equal to, or greater than the trailer “gross vehicle weight rating.”
ALWAYS inspect the hitch and coupling for wear. NeveR tow a trailer with defective hitches, couplings, chains, etc.
Check the tire air pressure on both towing vehicle and trailer. Trailer tires should be inflated to 80 psi cold. Also check the tire tread wear on both vehicles.
ALWAYS make sure the trailer is equipped with a safety chain.
ALWAYS properly attach trailer’s safety chains to towing vehicle.
ALWAYS make sure the vehicle and trailer directional, backup, brake and trailer lights are connected and working properly.
DOT Requirements include the following:
•Connect and test electric brake operation.
•Secure portable power cables in cable tray with tie wraps.
The maximum speed for highway towing is 55 MpH unless posted otherwise. Recommended
Avoid sudden stops and starts.This can cause skidding, or
Avoid sharp turns to prevent rolling.
Trailer should be adjusted to a level position at all times when towing.
Raise and lock trailer wheel stand in up position when towing.
Place chock blocks underneath wheel to prevent rolling while parked.
Place support blocks underneath the trailer’s bumper to prevent tipping while parked.
Use the trailer’s swivel jack to adjust the trailer height to a level position while parked.
page 10 — MAYCO LS600P CONCRETE PUMP • operation manual — rev. #0 (05/13/13)
