Safety Information

CaUTiON

„NeveR lubricate components or attempt service on a running machine.

„NeveR block or restrict flow from discharge hose. Remove kinks from discharge line before starting pump. Operation with a blocked discharge line can cause water inside pump to overheat.

„DO NOT operate this equipment unless the hopper grate, guards and safety devices are attached and in place.

„CaUTiON must be exercised while servicing this equipment. Rotating and moving parts can cause injury if contacted.

„Keep hands out of the hopper when the engine is running.

NOTICE

„In winter drain water from the lubrication box to prevent freezing.

„ALWAYS be sure the operator is familiar with proper safety precautions and operation techniques before using pump.

„Keep all inexperienced and unauthorized people away from the equipment at all times.

„Before start-up, check the hopper and remove all foreign matter and debris.

„DO NOT use worn or damaged hose couplings, inspect all hoses and couplings for wear. Replace any worn or defective hose or couplings immediately.

„Unauthorized equipment modifications will void all warranties.

„Check all fasteners periodically for tightness. Also check towing tongue bolt, lock nut and wheel lug nuts for wear.

„Test the pump's emergency stop switch. The purpose of this test is to shut down the engine in the event of an emergency.

„Refer to the Perkins Engine Owner's Manual for engine technical questions or information recommended by Multiquip for this equipment. Damage to the equipment and or injury to user may result.

„ALWAYS remove the ignition key when leaving the pump unattended.

„ALWAYS block the wheels on the unit when using on a slope.

„ALWAYS use properly rated hoses and clamps — 1500 PSI or higher.

„ALWAYS allow the pump a proper amount of time to cool before servicing.

„ALWAYS keep the machine in proper running condition.

„ALWAYS ensure pump is on level ground before use.

„Fix damage to machine and replace any broken parts immediately.

„ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children and unauthorized personnel.

eNgiNe SafeTY

WaRNiNg

„DO NOT place hands or fingers inside engine compartment when engine is running.

„NeveR operate the engine with heat shields or guards removed.

„ DO NOT remove the engine oil drain plug while the engine is hot. Hot oil will gush out of the oil tank and severely scald any persons in the general area of the pump.

CaUTiON

„NeveR touch the hot exhaust manifold, muffl er or cylinder. Allow these parts to cool

before servicing equipment.

page 8 — MAYCO LS600P CONCRETE PUMP • operation manual — rev. #0 (05/13/13)

Page 7 Page 9
Page 8
Image 8
Multiquip LS600P operation manual ENgiNe SafeTY, Before servicing equipment
Page 7 Page 9

LS600P specifications

The Multiquip LS600P is an innovative solution in the realm of construction machinery, designed to meet the demanding needs of modern job sites. This versatile piece of equipment is particularly noteworthy for its performance capabilities, fuel efficiency, and user-friendly design, making it an essential addition for contractors seeking reliability and efficiency.

One of the standout features of the LS600P is its powerful engine, which delivers robust performance while minimizing fuel consumption. This results in lower operating costs, enabling contractors to maximize their investment. The LS600P is equipped with a dependable and environmentally friendly engine, compliant with emission standards, thus contributing to sustainable operations on job sites.

The machine is designed with a focus on ease of use and operator comfort. Its intuitive control panel allows for straightforward operation, reducing the learning curve and enabling operators to become proficient quickly. Additionally, the ergonomic design of the operator's platform provides comfort during long hours of operation, enhancing productivity and reducing fatigue.

In terms of versatility, the LS600P can be utilized for a variety of applications. Whether it is compaction for paving projects, soil stabilization, or site preparation, its multi-functional capabilities make it suitable for diverse construction tasks. This adaptability is further enhanced by its compatibility with various attachments, allowing contractors to customize the machine to meet specific project requirements.

The durability of the LS600P is another key characteristic. Built with high-quality materials and components, it is engineered to withstand the harsh conditions often encountered on construction sites. This durability, combined with easy maintenance features, ensures that the Multiquip LS600P will provide reliable service over its operational lifespan.

Incorporating advanced technologies, the LS600P features an efficient hydraulic system that enhances its performance and responsiveness. This hydraulic system not only improves the effectiveness of its functions but also contributes to energy efficiency, thus promoting greener operations.

In conclusion, the Multiquip LS600P is a high-performance, efficient, and versatile machine. With features focused on user comfort, operational efficiency, and adaptability for various tasks, it stands out as a reliable choice for contractors aiming to enhance productivity and project outcomes on their construction sites.
Top Page Image Contents