Multiquip LS600P operation manual Maintenance, Check Brake Lights Check Tire Conditions

maintenance

	Table 5. Inspection/Maintenance	10 Hrs	250 Hrs	500 Hrs	1000	OTHER
		DAILY			Hrs
	Check Engine Fluid Levels	X
	Check Air Cleaner	X
	Check Battery Acid Level	X
	Check Fan Belt Condition	X
	Check for Leaks	X
	Check for Loosening of Parts	X
	Replace Engine Oil and Filter 1		X
	Clean Air Filter		X
Engine
	Check Fuel Filter/Water Separator Bowl	X
	Clean Unit, Inside and Outside	X
	Change Fuel Filter			X
	Clean Radiator and Check Coolant Protection Level2			X
	Replace Air Filter Element 3			X
	Check all Hoses and Clamps 4				X
	Clean Inside of Fuel Tank				X
	Check Battery		X
	Visually Check for Oil Leaks	X
	Hydraulic Oil Level	X
	Lubrication Box	X
	Replace Hydraulic Oil				X
	Clean Hydraulic Filters
Pump	Grease Shuttle Axle Crank	X				2 Hrs.
	Grease Shuttle Cylinder					Monthly
	Check System Pressure	X
	Check Hardware for Tightness					Weekly
	Check Cutting Wear Ring					Weekly
	Check Brake Lights	X
	Check Tire Conditions	X
Trailer	Inspect Saftey Devices / Decals	X
	Check Wheel Bearings					6-Months
	Inspect Brake Lining					6-Months

*1	Replace engine oil and filter at 100 hours, first time only.
*2	Add “Supplemental Coolant Additives (SCA’S)” to recharge the engine coolant.
*3	Replace primary air filter element when restriction indicator shows a vacuum of 625 mm (25 in. H20).
*4	If blowby hose needs to be replaced, ensure that the slope of the blowby hose is at least a 1/2 inch per foot,
	with no sags or dips that could collect moisture and/or oil.

MAYCO LS600P CONCRETE PUMP • operation manual — rev. #0 (05/13/13) — page 39