inspection
2.If the hydraulic oil level is low, remove the hydraulic oil tank cap just above the oil level sight glass (Figure 14) and add the correct amount of hydraulic oil to bring the hydraulic oil level to a normal safe operating level. Use Shell oil Tellus 68 or Mobil oil DFE26.
CAP
FILLER
HOLE
Figure 14. Adding Hydraulic Oil (Filler Hole)
3.Check the oil level in the lubrication box (Figure 15). If low, fill with up to 3 gallons of SAE #30 motor oil (Figure 14). The oil level must be checked daily. The lubrication box should be serviced as described in the maintenance section.
TOP
COVER
TION
LUBRICABOX
Figure 15. Filling the Lubrication Box
MAYCO LS600P CONCRETE PUMP • operation manual — rev. #0 (05/13/13) — page 31
