pump components

Figure 5 and illustrates the location of the major components for the LS600P Concrete Pump. The function of each component is described below:

1.Tow Hitch Coupler — Requires a 2-inch ball hitch or a 3-inch pintle. Capable of towing 8,000 lbs.

2.Radio Control Antenna — Mounting location for radio control antenna. Works in conjunction with hand-held radio remote (option).

3.Manifold Access Door — Release latch and lift door to access the hydraulic manifold block.

4.Hydraulic Oil Reservoir Access Cover — Remove this cover to gain access to the hydraulic oil tank for maintenance/cleaning.

5.Hydraulic Manifold Block — Manifold block that controls the flow of hydraulic pressure to the components required to control the pump.

6.Shuttle Cylinder/Guard — Under pressure, the shuttle cylinder shears concrete passing from the concrete cylinder to the delivery line during the cycle phase. ALWAYS keep hands clear from shuttle cylinder during operation.

7.Rear Pumping Jack Stand — Use this jack stand to level and support the rear end of the pump during operation. NEVER deploy on un-level ground and always check for firmness of ground.

8.Tires — This trailer uses two ST235/80R16 type tires. Tire inflation pressure is the most important factor in tire life. Pressure should be checked to 80 psi cold before operation. DO NOT bleed air from tires when they are hot. Check inflation pressure weekly during use to insure the maximum tire life and tread wear.

9.Fuel Tank/Cap — Fill with diesel fuel. Fuel tank (cell) holds approximately 40 gallons (176 liters). DO NOT top off fuel. Wipe up any spilled fuel immediately.

10.Battery — This unit uses a +12 VDC type battery. ALWAYS use gloves and eye protection when handling the battery.

11.Fuel Tank (Cell) Access Cover — Remove this cover to gain access to the fuel tank for maintenance/cleaning.

12.Parking Jack Stand — Use this jack stand to level and support the tow end of the pump.

13.Front Pumping Jack Stand — Use this jack stand to level and support the rear end of the pump during operation. NEVER deploy on un-level ground and always check for firmness of ground.

14.Safety Chains — This pump uses 5/16-inch thick, 72 inches long zinc-plated saftey chains. ALWAYS connect safety chains when towing.

MAYCO LS600P CONCRETE PUMP • operation manual — rev. #0 (05/13/13) — page 23

Page 22 Page 24
Page 23
Image 23
Multiquip LS600P operation manual Pump components
Page 22 Page 24

LS600P specifications

The Multiquip LS600P is an innovative solution in the realm of construction machinery, designed to meet the demanding needs of modern job sites. This versatile piece of equipment is particularly noteworthy for its performance capabilities, fuel efficiency, and user-friendly design, making it an essential addition for contractors seeking reliability and efficiency.

One of the standout features of the LS600P is its powerful engine, which delivers robust performance while minimizing fuel consumption. This results in lower operating costs, enabling contractors to maximize their investment. The LS600P is equipped with a dependable and environmentally friendly engine, compliant with emission standards, thus contributing to sustainable operations on job sites.

The machine is designed with a focus on ease of use and operator comfort. Its intuitive control panel allows for straightforward operation, reducing the learning curve and enabling operators to become proficient quickly. Additionally, the ergonomic design of the operator's platform provides comfort during long hours of operation, enhancing productivity and reducing fatigue.

In terms of versatility, the LS600P can be utilized for a variety of applications. Whether it is compaction for paving projects, soil stabilization, or site preparation, its multi-functional capabilities make it suitable for diverse construction tasks. This adaptability is further enhanced by its compatibility with various attachments, allowing contractors to customize the machine to meet specific project requirements.

The durability of the LS600P is another key characteristic. Built with high-quality materials and components, it is engineered to withstand the harsh conditions often encountered on construction sites. This durability, combined with easy maintenance features, ensures that the Multiquip LS600P will provide reliable service over its operational lifespan.

Incorporating advanced technologies, the LS600P features an efficient hydraulic system that enhances its performance and responsiveness. This hydraulic system not only improves the effectiveness of its functions but also contributes to energy efficiency, thus promoting greener operations.

In conclusion, the Multiquip LS600P is a high-performance, efficient, and versatile machine. With features focused on user comfort, operational efficiency, and adaptability for various tasks, it stands out as a reliable choice for contractors aiming to enhance productivity and project outcomes on their construction sites.
Top Page Image Contents