Multiquip LS600P eNviRONMeNTaL SafeTY/DeCOMMiSSiONiNg, eMiSSiONS iNfORMaTiON, Safety Information

Models: LS600P

1 88
Download 88 pages 1.68 Kb
Page 11
Image 11
eNviRONMeNTaL SafeTY/DeCOMMiSSiONiNg

Safety Information

eNviRONMeNTaL SafeTY/DeCOMMiSSiONiNg

NOTICE

Decommissioning is a controlled process used to safely retire a piece of equipment that is no longer serviceable. If the equipment poses an unacceptable and unrepairable safety risk due to wear or damage or is no longer cost effective to maintain (beyond life-cycle reliability) and is to be decommissioned (demolition and dismantlement),be sure to follow rules below.

„DO NOT pour waste or oil directly onto the ground, down a drain or into any water source.

„Contact your country's Department of Public Works or recycling agency in your area and arrange for proper disposal of any electrical components, waste or oil associated with this equipment.

„When the life cycle of this equipment is over, remove battery and bring to appropriate facility for lead reclamation. Use safety precautions when handling batteries that contain sulfuric acid.

„When the life cycle of this equipment is over, it is recommended that the trowel frame and all other metal parts be sent to a recycling center.

Metal recycling involves the collection of metal from discarded products and its transformation into raw materials to use in manufacturing a new product.

Recyclers and manufacturers alike promote the process of recycling metal. Using a metal recycling center promotes energy cost savings.

eMiSSiONS iNfORMaTiON

NOTICE

The diesel engine used in this equipment has been designed to reduce harmful levels of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx) contained in diesel exhaust emissions.

This engine has been certifi ed to meet US EPA Evaporative emissions requirements in the installed confi guration.

Attempting to modify or make adjustments to the engine emission system by unauthorized personnel without proper training could damage the equipment or create an unsafe condition.

Additionally, modifying the fuel system may adversely affect evaporative emissions, resulting in fi nes or other penalties.

Emission Control Label

The emission control label is an integral part of the emission system and is strictly controlled by regulations.

The label must remain with the engine for its entire life.

If a replacement emission label is needed, please contact your authorized Perkins Engine Distributor.

MAYCO LS600P CONCRETE PUMP • operation manual — rev. #0 (05/13/13) — page 11

Page 11
Image 11
Multiquip LS600P eNviRONMeNTaL SafeTY/DeCOMMiSSiONiNg, eMiSSiONS iNfORMaTiON, Emission Control Label, Safety Information