Engine Oil Check
1.Make sure pump/engine is placed on level ground.
2.Remove the engine oil dipstick from its holder (Figure 11).
DIPSTICK
|
|
|
|
| inspection | |||||
|
| Table 4. Oil Selection Chart |
|
| ||||||
F | C |
|
|
| OIL: SAE |
|
|
|
| |
|
|
|
|
|
|
|
|
| ||
122 | 50 |
|
|
|
|
|
|
|
|
|
104 | 40 |
|
|
|
|
|
|
|
|
|
86 | 30 |
|
|
|
|
|
|
|
|
|
68 | 20 | 5W/30 | 5W/40 | 10W | 10W/30 | 10W/40 | 15W/40 | 20W/20 | 30 | 40 |
50 | 10 | |||||||||
32 | 0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| ||
Figure 11. Engine Oil Dipstick Location
3.Verify that engine oil level (Figure 12) is maintained between the two notches on the dipstick.
Figure 12. Engine Oil Level (Dipstick)
4.If the pump's engine oil is low, fill engine crankcase with lubricating oil through filler hole, but DO NOT overfill.
5.The oil listed in Table 4 is recommended to ensure better engine performance. Use class CD or higher grade motor oil.
Hydraulic Oil Check
1.Determine if the hydraulic oil level is low by observing the level of the oil in the hydraulic oil sight glass (Figure 13).
NORMAL OIL LEVEL
HYDRAULIC OIL TEMPERATURE
MINIMUM OIL LEVEL
Figure 13. Hydraulic Oil Sight Glass
page 30 — MAYCO LS600P CONCRETE PUMP • operation manual — rev. #0 (05/13/13)
