UNPACKING
Follow these steps to safely unpack the printer:
1.Open the top cover of the shipping box.
2.Remove the optional 2nd Tray box (if you have the 4650NX model) and remove the QuickStart poster.
3.Open the inner printer box and remove the Accessory kit and Starter kit.
4.Turn the large plastic box screws at the bottom of the box to the left (A) and pull them out (B).
5.Using your thumb and finger, remove the plastic screw sleeves from the box (C).
6.Lift off the outer box (D).
Unpacking the Inner Printer Box
AB
D
7.Open the plastic bag that contains the printer and slide it down.
8.With one person on each side of the printer, grasp the printer at the hand grips where they are exposed by notches in the foam padding (E).
9.Lift the printer and place it on a sturdy, level surface.
If you are setting up a 4650NX printer unpack the optional
See Page 28 in Chapter 3 or the 4650 Series QuickStart.
C
E
note: Save the box, box screws, and packing material. If you ship the printer in the future, be sure to follow the special packing instructions in Appendix D to safeguard internal components.
Caution! The printer and packaging weigh approximately 100lbs.To set up the printer and move it requires two adults.
12 SuperScript 4650 Series — User’s Guide
