ADDING MEMORY (DIMM)
The SuperScript 4650 color laser printers have two Dual Inline Memory Module (DIMM) slots. The 4650 model comes with 32MB RAM, the 4650N comes with 96MB RAM, and the 4650NX comes with 128MB RAM. However, you can upgrade your printer to a maximum of 256MB of RAM through the installation of additional DIMMs.
Installing additional memory will help ensure that your printer has enough memory to print the most complex graphic print jobs without sacrificing resolution. But configuring the printer with more than 128 Mbytes of RAM will not noticeably increase printer performance.
note: It takes a minimum of 96MB RAM to support 1200 X 1200 dpi resolution.
Use high quality DIMMs with the following properties:
•168 pin DIMM
•PC100 SDRAM
•64 bit wide
configuration |
|
(i.e. 8M x 64) | NEC |
•3.3v
•32MB or larger 
•DIMMs with 
parity or ECC
are not supported
•Only DIMMs using 64Mbit SDRAMs, or larger, are supported
The easy way to tell if you have the 64 Mbit SDRAM chips or larger is that we only allow 4 or 8 chips on each side of the SDRAM. A 32MB DIMM can only have four chips on a single side; 64MB, 128MB and 256MB DIMMs can have 4 or 8 chips on each side. The most common SDRAM DIMMs will be found in these configurations.
If you want to upgrade your memory from 32MB to 96MB, install a 64MB SDRAM in the empty SDRAM slot.
If you want to upgrade your memory from 128MB to 256MB,
install another 128MB DIMM in the other memory slot. Your printer now has 256MB of RAM.
The instructions on the next page explain how to install memory in your printer yourself. You can also contact an
When you turn on your printer it will automatically recognize the added memory. The new memory should show up on the Start up page shown below. Make sure the printer driver knows about your added memory. See Chapter 4 about changing device settings in your driver.
Startup Page
GENERAL INFO
Printer Name: SuperScript 4650N
Software Version: 0.04
Build Time: 936928632
PostScript Version: 3010.108
PrintAgent Version: 1.008
Disk Resource Version: 0.0.4N
STORAGE
RAM Installed: 128 Megabytes
Disk Size: 1964.03 Megabytes
Disk Free: 1667.97 Megabytes
JOB OPTIONS
Number of Copies: 1
Print PS Errors: Enabled
Wait Timeout: 240 seconds
Job Timeout: Never
ENGINE INFO
Default Resolution: 600.0 X 600.0 DPI
Edge Smoothing: Disabled
Jam Recovery: Enabled
Tray 1: Letter
Tray 2: Legal
Pages Printed: 2182
PARALLEL PORT
Status: Enabled
Personality: AutoSelect
NETWORK PORT
Status: Enabled
Personality: AutoSelect
Web Address: http://131.241.45.88
For sales information, call (800)
©1999 NEC Technologies, Inc. All rights reserved. NEC and the NEC logo are registered trademarks and SuperScript is a trademark of NEC Corporation. Adobe, PostScript and the PostScript logo are trademarks of Adobe Systems Incorporated or its subsidiaries and may be registered in certain jurisdictions. All other trademarks and registered trademarks are the property of their respective owners.
PRINTER OPTIONS
Adding Memory (DIMM) | 31 |
