Operator Panel Menus
The Operator Panel for the 4650N(X) model printers has eight main menus, described below. The 4650 model printer does not include the PCL or the Advanced Features menu. Default selections for each setting are marked with an asterisk (*).
Control Menu
Use this menu to cancel the current print job or reset the printer when the printer is in an error state. Selecting RESET PRINTER restarts the printer and causes it to reinitialize and perform a
CONTROL |
| |||
JOB HOLD PRINT* |
| |||
RESET PRINTER |
|
| CONFIRM | |
|
| |||
RESET NIC |
|
| PARAMETERS | |
| ||||
|
|
|
|
|
*Default selection for the setting.
Setup Menu
Use this menu to configure the default settings for jobs that are not sent using printer driver software, or restore the factory default settings. The JOB DEFAULTS submenu allows you to set the appearance of print jobs. The MISCELLANEOUS menu allows you to set printer operation settings. Select RESTORE DEFAULTS to return printer settings to their factory defaults (except communications parameters).
SETUP
JOB DEFAULTS |
|
|
|
| |||||||
RESOLUTION** |
|
|
|
|
|
| 600 x 600* / 1200 x 1200 | ||||
|
|
|
|
|
| ||||||
EDGE SMOOTHING |
|
|
| ENABLE / DISABLE* | |||||||
|
|
| |||||||||
COPIES |
|
|
|
|
|
|
|
|
| 1* to 999 | |
|
|
|
|
|
|
|
|
| |||
MISCELLANEOUS |
|
|
|
| |||||||
POWER SAVE |
|
|
| NEVER, 30 MIN., 1HOUR*, | |||||||
|
|
| |||||||||
|
|
|
|
|
|
|
|
| 1.5HOURS, 2HOURS, 3HOURS | ||
JAM RECOVERY |
|
|
|
| NO / YES* | ||||||
|
|
| |||||||||
MEMORY |
|
| 32MB, 64MB, | ||||||||
| |||||||||||
|
|
|
|
|
|
|
| 96MB, 128MB, | |||
RESTORE DEFAULTS | 160MB, 192MB, 256MB | ||||||||||
|
|
|
| ||||||||
